Through the training course, the aim is to practice the fundamentals, skills of controlling and operating vehicles in conditions close to actual combat; evaluate the parameters and tactical features of domestically assembled artillery trucks.

Thoroughly understand the mission before conducting training.

The team of drivers are trained on various complex terrains (steep slopes, muddy roads, urgent military roads, etc.). This helps drivers not only hone their skills and master basic skills, but also improve their ability to react flexibly to all challenges.

Preparations for the training course were carried out very carefully.

The training content consists of 2 parts. Part 1 is driving training, overcoming the following categories: 0.7m wide trench; overcoming 0.6m vertical wall; 25cm buffalo ridge; overcoming slopes of 21 0 (40%), 26 0 (50%) and 31 0 (60%); overcoming underground tunnels with a depth of 1.75m. Part 2 is practical driving training when pulling artillery at a load on the truck bed of 25% to 50%, pulling artillery weighing from 2.1 tons to 8.5 tons, overcoming slopes of 20 0 (41%).

Some pictures during the training process.

The representative of the Organizing Committee said that the preparation for the training course was carried out carefully, from the development of plans, lesson plans, terrains, equipment (cars and artillery); ensuring safety for people and vehicles. At the same time, the selection of teachers who are experienced cadres directly instruct and impart knowledge and practical experience to the drivers participating in the training.

Successfully organizing the training course is the basis for the Department of Motorcycles and Transport to do a good job of preparing to serve the Acceptance Council at the Ministry of National Defense level.

News and photos: MINH MANH - THANG BAY

    Source: https://www.qdnd.vn/quoc-phong-an-ninh/tin-tuc/cuc-xe-may-van-tai-to-chuc-huan-luyen-lai-xe-thuc-hanh-keo-phao-tren-cac-dia-hinh-phuc-tap-838625